Portal Tecnológico Portal comercial
 
Información tecnológica avanzada para empresas del metal
Está usted aquí: > Home > Artículos > MedioambienteSíguenos a través de Facebook
  Buscar en el Observatorio: 
Texto libre:
Área:
Desde   hasta
  Ficha de Artículos Técnicos: 
volver
  Referencia 10254
Título: Ciclo de reciclaje de materiales como herramienta de diseño
Título original: The recycling cycle of materials as a design project tool
Autor: Luis Cândido, Wilson Kindlein, Renan Demori, Larissa Carli, Raquel Mauler, Ricardo Oliveira
Resumen: Currently, a large number of companies consider recycling of materials as an opportunity to maximize profits and to reduce the environmental impact generated by these materials after they are disposed. However, there is also a strong constraint on the use of recycled materials mainly due to the lack of technical/scientific information, which would relate their physical properties to their recycling cycle. This information should be used in the initial phase of the product design to serve as reference for the simulation of a project to point out the physical properties obtained from recycling the Projected material (Pm). Thus, it would be possible to foresee some recycling strategy to keep the good characteristics of recycled materials by encouraging their use, regardless of the product to be designed. 

Therefore, the Recycling Cycle of Materials (RCM) is a tool that provides scientific/technical support in the selection of materials. It uses the information related to the physical properties of the Pm as a parameter for product design after five recycling cycles. For the case study, this tool has been applied to obtain the basic material of ABS/PC blend. Subsequently, this blend was evaluated using DSC, FTIR, traction and impact methods to obtain delimiting data for the definition of the mechanical properties resulting from the application of RCM.
Idioma: Inglés     País: Brasil     ISBN / ISSN: 0959-6526     Año: 2011
Tipo: Artículo
Área: Medioambiente > Ecodiseño
Entidad: Department of DEG/FA, Institution of Federal University of Rio Grande do Sul, Osvaldo Aranha 99/604, CEP 90035-190, Porto Alegre-RS//Department of EE/DEMAT/LDSM, Institution of Federal University of Rio Grande do Sul, Osvaldo Aranha 99/604, CEP 90035-190, Porto Alegre-RS//
Fuente: Journal of Cleaner Production
Localización en fuente: In Press, Corrected Proof, Available online 12 May
Descriptores: Materiales reciclados, ciclo de reciclaje de materiales, selección, diseño para el reciclaje, Cycle; Recycle; Selection; Materials; 3R’s; Product; Design
Envía esta noticia
email destinatario:
nombre o email remitente:
volver
 
Si desea colaborar o hacernos sugerencias: otea@aimme.es
miércoles, 19 de febrero de 2020 - © Copyright 2020 AIMME. Todos los derechos reservados.
Parque Tecnológico, Avda. Leonardo Da Vinci, 38. 46980 PATERNA (Valencia) SPAIN. Tel.: +34 96 131 85 59. Fax: +34 96 131 81 68
general@aimme.es